| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Polyethelene Glue !! http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=3063 |
Page 1 of 1 |
| Author: | AlohaDan [ Sat Feb 18, 2006 1:53 pm ] |
| Post subject: | Polyethelene Glue !! |
Is the search for a poly glue over? From 3M Two-part epoxies have evolved over three dis- Among the most recent advances in acrylic tech- nology are 3M Scotch-Weld Structural Plastic Ad- hesives DP-8005 and DP-8010. These readily bond polypropylene, TPOs, and other difficult-to-bond low surface energy plastics. They provide high shear and peel strengths while reducing the surface preparation time and cost of traditional adhesives. at: http://www.pressreleasefinder.com/prdoc ... rticle.pdf Unfortunately it looks like the small quantity tubes from Granger etc require a $40 applicator.See: http://tinyurl.com/b6yqj But also checkout 3M(TM) Scotch-Grip(TM) Plastic Adhesive 4693, It has immediate bond strength, long tack range and contact bond properties. It exhibits outstanding bond strength to metals and many plastics, including polypropylene, polyethylene and high-impact polystyrene. Good resistance to water and aging. 4693H is a thicker version available in tubes at: https://rshughes.com/products/021200_30088.html I've ordered a tube and will post results later.[/i] |
|
| Author: | AlohaDan [ Wed Feb 22, 2006 12:19 pm ] |
| Post subject: | |
Sorry guys I had to cancel the order for the$14 tube. Because I'm in Hawaii they wanted to stick me $70 for shipping hazard material via UPS 2nd day air.(no USPS) Someone can probably get it for $8 freight UPS ground. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|