Hobie Forums
http://www.hobie.com/au/en/forums/

New Handle part numbers and use on non TI
http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=31960		 Page 1 of 1
Author:  Yakaholic [ Sun Sep 19, 2010 10:07 am ]
Post subject:  New Handle part numbers and use on non TI
I tracked down 2 part numbers

88991301 - TI Steering Handle - $8.95
88991351 - Steering Knob - $6.95

Am I correct in assuming that this handle and knob will work on older boats?

Specifically the Adventure Island pre-2010 models?

If so I guess they must use the same allen screw attachment.

TIA

Putting together a huge parts order and wanted to be sure this handle would work so I can add it to the list.

Image


Yakaholic
Author:  Roadrunner [ Sun Sep 19, 2010 8:11 pm ]
Post subject:  Re: New Handle part numbers and use on non TI
mmiller wrote:
The "Knob" requires an all new steering handle and internal steering crank. This is not yet available for the AI.
It looks like you need to add a new steering crank to your list -- I think the new handle uses a different attachment method. 8)
Author:  Yakaholic [ Sun Sep 19, 2010 8:57 pm ]
Post subject:  Re: New Handle part numbers and use on non TI
Roadrunner wrote:
mmiller wrote:
The "Knob" requires an all new steering handle and internal steering crank. This is not yet available for the AI.
It looks like you need to add a new steering crank to your list -- I think the new handle uses a different attachment method. 8)


Thanks

OK, Yes I was having a hard time seeing the allen screw on the new handle.

81370001 STEERING CRANK $16.50
81372001 STEERING CRANK ADV/OUTFITTER $16.50

And I have to believe that neither of these are the correct parts for the new handle because they are old part numbers, bummer :(

The 2011 AI and Adventure are supposed to be shipped with the new handle and so must be using the new internal steering crank :?: , so Hobie just needs to add it to their parts catalog....

I can see my already big parts order growing more expensive by the minute - :lol:
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/