Hobie Forums http://www.hobie.com/au/en/forums/ |
|
mounting camera on kayak http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=34275 |
Page 1 of 1 |
Author: | big joe [ Sun Mar 06, 2011 5:48 pm ] |
Post subject: | mounting camera on kayak |
i have a pro angler and i just bought a hd waterproof gopro sports camera. does anyone have any tips on mounting this for some good video on my next fishing trip thanks joe ![]() |
Author: | kingdaddy [ Sun Mar 06, 2011 6:02 pm ] |
Post subject: | Re: mounting camera on kayak |
Broom handle off the sailing mast receptacle with a clamp or jobe grip tripod mount or something like that. |
Author: | NAHCA555 [ Sun Mar 06, 2011 10:19 pm ] |
Post subject: | Re: mounting camera on kayak |
I mounted one on top of my rudder casting looking forward a few times... with the rudder up (so I'm not swerving all over) I could use the rudder pedals to pan the camera back and forth. |
Author: | Thinwater skinner [ Mon Mar 07, 2011 7:29 am ] |
Post subject: | Re: mounting camera on kayak |
NAHCA555 wrote: I mounted one on top of my rudder casting looking forward a few times... with the rudder up (so I'm not swerving all over) I could use the rudder pedals to pan the camera back and forth. Now this tip is boardering on genius!!! WOW, I like the tip. thanks |
Author: | MrGreen [ Sun Mar 20, 2011 4:50 pm ] |
Post subject: | Re: mounting camera on kayak |
I cut a piece of half inch SCH 40 PVC pipe and glued a threaded fitting onto one end. Then I took a threaded plug and drilled a quarter inch hole in the center and but a 1/4"- 20 bolt for the camera to mount on and then threaded the plug in to the fitting. The half inch PVC fits nicely into the sailing mast receiver. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |