| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| need to find polethylene sheets for repair. . help! http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=55897 |
Page 1 of 1 |
| Author: | benhebert83 [ Thu Sep 03, 2015 1:03 pm ] |
| Post subject: | need to find polethylene sheets for repair. . help! |
I am in need or covering holes in my kayak that the previous owner made in my Revolution 13. Where can you buy sheets of polyethylene? I've tried looking at many different industrial suppliers online and cannot seem to fin any. Help please! |
|
| Author: | mmiller [ Thu Sep 03, 2015 2:15 pm ] |
| Post subject: | Re: need to find polethylene sheets for repair. . help! |
Hobie cat has round cut outs from installing hatches. 8" is largest and may have a vent hole within that. |
|
| Author: | pmmpete [ Thu Sep 03, 2015 8:53 pm ] |
| Post subject: | Re: need to find polethylene sheets for repair. . help! |
How big are the holes? Are they just screw holes, or are they bigger? If they're just screw holes, you can avoid a big plastic welding frenzy and extravaganza by installing screws or bolts in the holes with a little goop to seal them. That would be easy and effective. |
|
| Author: | gaKayakandSail [ Tue Sep 08, 2015 1:33 pm ] |
| Post subject: | Re: need to find polethylene sheets for repair. . help! |
If the hole is < 1", wonder if using one of the cable pass throughs will work. There is an option for a blank.... |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|