| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Bolt for Cam Lock Knob on 2002 Outback http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=57760 |
Page 1 of 1 |
| Author: | nuprin [ Wed May 25, 2016 2:03 pm ] |
| Post subject: | Bolt for Cam Lock Knob on 2002 Outback |
I've been able to find the Cam Lock Knob online, but none of them indicate exactly what size bolt I would need. Does anyone know what size I would need or possibly a part #? |
|
| Author: | mmiller [ Wed May 25, 2016 2:55 pm ] |
| Post subject: | Re: Bolt for Cam Lock Knob on 2002 Outback |
We don't stock some of the older bolts... May have to remove the other and match at Home Depot or something. |
|
| Author: | nuprin [ Wed Jun 01, 2016 1:33 pm ] |
| Post subject: | Re: Bolt for Cam Lock Knob on 2002 Outback |
mmiller wrote: We don't stock some of the older bolts... May have to remove the other and match at Home Depot or something. Do you have any info on the length/size/thread for the original bolt? I don't have either of the cam lock knobs, so both would need to be purchased. I'm fine with getting one at a hardware store, but would be helpful if I had the exact specs. |
|
| Author: | mmiller [ Tue Jun 28, 2016 12:33 pm ] |
| Post subject: | Re: Bolt for Cam Lock Knob on 2002 Outback |
They varied and changed over time... I don't have a reliable spec. Both of these are listed in an old catalog. You should be able to tell how deep the hole was penetrated to the the correct length for that year model. BOLT 3/8-16 X 1-1/2 HEX CAP-S BOLT 3/8-16 X 2-1/2 SCK H |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|