Hobie Forums http://www.hobie.com/au/en/forums/ |
|
A quick question ! http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=58211 |
Page 1 of 1 |
Author: | Tech [ Mon Jul 04, 2016 6:39 pm ] |
Post subject: | A quick question ! |
How does the mirage drive behave if the idler cable broken ? |
Author: | Roadrunner [ Mon Jul 04, 2016 9:42 pm ] |
Post subject: | Re: A quick question ! |
Quick answer -- it will continue to operate, although not as smoothly and with greater stress on the other parts. By all means use it to get back, but replace it right away before you break something else. The Drive will operate in some fashion with a wide assortment of failed parts. My friend threw a fin the other day and pedaled his Revo 13 back at about 3.5 MPH with his remaining one fin. The Drive will also operate with the failure of any one of the three cables. Users who don't know this sometimes do a lot of unnecessary paddling! ![]() |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |