| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2015 Pro Angler 17T Rudder Cable Problem http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=60594 |
Page 1 of 1 |
| Author: | VirginiaYakaddiction [ Mon May 22, 2017 3:17 am ] |
| Post subject: | 2015 Pro Angler 17T Rudder Cable Problem |
I believe that I damaged the rudder cable on my 2015 Pro Angler 17T this past weekend and have been unable to locate a schematic that may help in diagnosing and repairing my problem. It may be something simple or it may require a complete replacement but in either case, I would need the schematic in order to make the needed repairs. Any help that anyone can provide would be greatly appreciated. |
|
| Author: | HStrech [ Mon May 22, 2017 11:55 am ] |
| Post subject: | Re: 2015 Pro Angler 17T Rudder Cable Problem |
Here's a diagram that should be helpful: https://static.hobiecat.com/web_uploads ... _Sheet.PDF |
|
| Author: | mmiller [ Mon May 22, 2017 1:02 pm ] |
| Post subject: | Re: 2015 Pro Angler 17T Rudder Cable Problem |
You can place a camera down in the hull to look around. If you have a tablet or a friend with another phone, you can do facetime... camera inside and monitor outside. I use my GoPro for this as well. |
|
| Author: | VirginiaYakaddiction [ Sat May 27, 2017 3:52 am ] |
| Post subject: | Re: 2015 Pro Angler 17T Rudder Cable Problem |
Thanks Howie, I just saw your reply and I really appreciate the information. I may not have been clear in my description but the rudder cable for steering is fine and it's actually the rudder retract that isn't operating as designed. I called Hobie and was told that there are no drawings for the rudder. The drawing that you provided certainly contradicts what I was told by Hobie. Do you know of any reason why Hobie would not want to provide assistance to owners of their products? |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|