Hobie Forums
http://www.hobie.com/au/en/forums/

Need part # 8030126
http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=61379		 Page 1 of 1
Author:  staktup [ Wed Aug 23, 2017 8:24 pm ]
Post subject:  Need part # 8030126
Hi, I need part ## 8030126 to tighten down my rudder steering handle on my R13. The hex recess is becoming rounded and I don;t want to remove it to bring to a hardware store in case something falls apart in the crank assembly.

Can I just unscrew it and source it locally or do I need to order from Hobie? Thank you.
Author:  mmiller [ Wed Aug 23, 2017 8:33 pm ]
Post subject:  Re: Need part # 8030126
8030126 SCREW 10-32 x 3/8 FLNG BTN HX

10-32 x 3/8" is the critical feature.
Author:  staktup [ Wed Aug 23, 2017 8:41 pm ]
Post subject:  Re: Need part # 8030126
Thanks Matt!
Author:  Roadrunner [ Wed Aug 23, 2017 9:32 pm ]
Post subject:  Re: Need part # 8030126
When you replace it, put a dab of Loctite Blue on the threads so it doesn't back out. 8)
Author:  staktup [ Sat Aug 26, 2017 5:02 pm ]
Post subject:  Re: Need part # 8030126
Thanks guys, I could only find a 1/2" long 10-32 SS hex head screw but it seat in just fine (with blue Loctite) 8)
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/