Hobie Forums
http://www.hobie.com/au/en/forums/

Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis
http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=62746		 Page 1 of 1
Author:  plfinch [ Fri May 18, 2018 6:50 pm ]
Post subject:  Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis
While customizing the sail furling kit for my Oasis I used open pully blocks mounted where the port paddle bungee goes. I knew this would prevent use of the bungee but already planned on adding the PA Paddle Clip Assembly to hold the paddle - I really don’t like the bungees. I also have an H-rail on the starboard side which makes that bungee a little hard to secure. After installing the paddle clips on the port side, and liking them so much, I put another set on the other side. They work perfectly.

Peter

ImageImage
Author:  Roadrunner [ Sat May 19, 2018 7:58 am ]
Post subject:  Re: Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis
The standard paddle notch and bungee arrangement is definitely a pain to operate. I have been using the paddle more (for exercise) and installed "extender tabs" on the forward paddle notch for a quick, stable paddle rest without fighting the bungee. The rear paddle support is the grab handle. It's easy to just drop the paddle in for a quick paddle break -- looks like this:

Image

Image

When the paddle is not in use, the bungee secures it. 8)
Author:  winfield100 [ Sat Aug 29, 2020 2:53 pm ]
Post subject:  Re: Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis
plfinch wrote:
While customizing the sail furling kit for my Oasis I used open pully blocks mounted where the port paddle bungee goes. I knew this would prevent use of the bungee but already planned on adding the PA Paddle Clip Assembly to hold the paddle - I really don’t like the bungees. I also have an H-rail on the starboard side which makes that bungee a little hard to secure. After installing the paddle clips on the port side, and liking them so much, I put another set on the other side. They work perfectly.

Peter

ImageImage

What is the compass and where from please
Author:  plfinch [ Sat Aug 29, 2020 4:53 pm ]
Post subject:  Re: Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis
Ritchie XP-99W.

https://www.amazon.com/gp/product/B002LVJB92

I absolutely love it. And in hundreds of miles of kayaking that position on my round hatch has never been an issue or inconvenience.

Peter
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/