Try a set of needle nose pliers.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Can't Access Shock Cord Screw-in with Tool 71115101 http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=63446 |
Page 1 of 1 |
| Author: | YakSailor [ Sun Aug 12, 2018 7:33 pm ] |
| Post subject: | Can't Access Shock Cord Screw-in with Tool 71115101 |
I want to replace the worn front hatch retaining cord on my 2007 Revolutions, but can't unscrew the shock cord screw-in, even with the special tool. There is no clearance to turn the tool. Anyone able to replace this cord? |
|
| Author: | Roadrunner [ Mon Aug 13, 2018 9:20 pm ] |
| Post subject: | Re: Can't Access Shock Cord Screw-in with Tool 71115101 |
Try a set of needle nose pliers.
|
|
| Author: | YakSailor [ Tue Aug 14, 2018 8:01 am ] |
| Post subject: | Re: Can't Access Shock Cord Screw-in with Tool 71115101 |
Thanks, Roadrunner. I tried that, but I believe I need to find the right set of pliers to fit in the notches better. I am now thinking about sawing the lobes off of the 71115101 tool so that I can turn it in the tight space and use vice-grips to hold it. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|