Hobie Forums
http://www.hobie.com/au/en/forums/

Old Mirage - No Numbers - No matching models
http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=63819		 Page 1 of 1
Author:  vwhead77 [ Wed Oct 03, 2018 7:59 am ]
Post subject:  Old Mirage - No Numbers - No matching models
Hi all, I offered to help a friend repair his Mirage Kayak. The steering cable is broken at the rudder (both ends are still visible) and he needs some other parts. My problem is that this Mirage just says "Mirage" on it. I can't find any model that matches it - I'm assuming that it's an older model that may have been put out of production (?). Anyway, it is 12' 6" long (hull length). has a storage with the lid behind the seat and two hatches. I need to find the cable kit and the mechanism that secures the peddles (or the plug) - 2 X 3/8 threaded fem. Anyone with information that could steer me the right direction would be greatly appreciated.

>>>--->vwhead77
Author:  Roadrunner [ Wed Oct 03, 2018 8:51 pm ]
Post subject:  Re: Old Mirage - No Numbers - No matching models
The Hobie Mirage was their original pedaling kayak, first produced in 1998. When other models were introduced, it was renamed Mirage "Classic". It was produced through the 2006 model year. Excellent little boat!

Image

Your serial # should be on the side or bottom of the hull near the stern, hand etched. The last two digits are the model year.

If you want to send a pic of your drivewell, I'll be happy to see if anything is missing.

Your original rudder lines were monofilament, but have long since been replaced with Spectra. You'll have to re-string it yourself. 8)
Author:  Roadrunner [ Wed Oct 03, 2018 9:17 pm ]
Post subject:  Re: Old Mirage - No Numbers - No matching models
Looking through an old parts catalog, I found a steering line replacement kit, Mirage -- part # 80016. It may or may not be available.

If you are missing the cam lock knobs, and bolts that secure the Drive, they are part # 81410 and # 8040531 They look like this:

Image 8)
Author:  vwhead77 [ Thu Oct 04, 2018 9:02 am ]
Post subject:  Re: Old Mirage - No Numbers - No matching models
Thank you. I did manage to 'rig' the rudder cable using blue 'weed-whacker' line - seems to be holding up pretty good. Anyway, thank you for parts number for drive hardware. I will see if I can get my hands on those. Thanks again!!
Author:  MonikitaKayak [ Fri Jun 14, 2024 4:38 pm ]
Post subject:  Re: Old Mirage - No Numbers - No matching models
We have a really old one too and are very much struggling to find replacement parts! Specifically an uptown handle rudder. We searched for the model number as everyone suggests online and there just isn’t anything anywhere with any numbers on the bottom of the boat.
Author:  ant [ Sat Jun 15, 2024 11:06 am ]
Post subject:  Re: Old Mirage - No Numbers - No matching models
I have an old mirage with the same issue, broken up/down and steering handles which are impossible to find.
I think the reason Hobie changed the handle system is because the plastic just couldn't handle the stress from the set screw and would tend to crack, so even if you got a replacement plastic handle it would eventually suffer the same fate.

I've ordered a couple of these: https://www.ebay.com/itm/186438838697 and I'm hoping that I can fabricate new handles with a little bit of work, I'll let you know how it goes.
Author:  MonikitaKayak [ Sat Jun 15, 2024 3:35 pm ]
Post subject:  Re: Old Mirage - No Numbers - No matching models
Thanks for the tip! We are going to give that one a try!

ant wrote:
I have an old mirage with the same issue, broken up/down and steering handles which are impossible to find.
I think the reason Hobie changed the handle system is because the plastic just couldn't handle the stress from the set screw and would tend to crack, so even if you got a replacement plastic handle it would eventually suffer the same fate.

I've ordered a couple of these: https://www.ebay.com/itm/186438838697 and I'm hoping that I can fabricate new handles with a little bit of work, I'll let you know how it goes.
Author:  MonikitaKayak [ Sat May 03, 2025 9:16 am ]
Post subject:  Re: Old Mirage - No Numbers - No matching models
Does anyone have the old PDF with all the parts for the oldest model Mirage by any chance? It's gone from the internet, this year.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/