Hobie Forums
http://www.hobie.com/au/en/forums/

Hobie Mirage Revolution 11
http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=65227		 Page 1 of 1
Author:  Scottbig [ Tue Jul 23, 2019 8:50 am ]
Post subject:  Hobie Mirage Revolution 11
NEWBIE KAYAKER....

I’m looking for a used kayak for my GF. I found a 2013 Hobie Mirage Revolution 11 in California for $1,600... Blue, Super clean.

They probably paid $2,000 for this back then. Current model is $2,600.

Should I buy, or should I keep Looking? My gut tells me to offer $1,300 and settle on $1,450?

What are the issues that I should look for, found that there is cracking by the drive area so far.

Thanks for reading and responding!
Author:  mmiller [ Tue Jul 23, 2019 9:19 am ]
Post subject:  Re: Hobie Mirage Revolution 11
Take a look at the Passport. Brand new kayak for a good price. 10 foot 5".
Author:  Ottyo [ Mon Jul 29, 2019 6:58 am ]
Post subject:  Re: Hobie Mirage Revolution 11
The 2013 would have the old style seat which is not nearly as comfortable as the current seats. It would be better to get a Hobie 2015 or newer.
Author:  WAVERIDER [ Tue Jul 30, 2019 2:13 am ]
Post subject:  Re: Hobie Mirage Revolution 11
Would also have a pre GT drive. Not that that is essential but it is a value point.
Author:  Roadrunner [ Tue Jul 30, 2019 3:00 pm ]
Post subject:  Re: Hobie Mirage Revolution 11
I have both the '11 and a '14 Revo 11s and personally prefer the lower center of gravity the older seats provide. I use the i-comfort seat pad with it and find it quite comfortable. You do get a wet butt with the old seats pretty easily so if that is an issue, then a '15 or newer model might be preferable. The 2013 "V-2" Drive is every bit as durable as the newer GT Drive (2015 and newer), but has a little more friction. It can be upgraded for about $150 to $250 (depending on whether you are adding Turbofins).

You should have no cracking issues in the drivewell area on this boat. 8)
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/