| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Pro Angler 17t http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=66632 |
Page 1 of 1 |
| Author: | Toolman [ Mon Jun 01, 2020 12:58 am ] |
| Post subject: | Pro Angler 17t |
Hey all, developed a problem with our rudder on the pro angler 17t not releasing and dropping into the vertical position. It can be pulled down by hand and it can be pulled up into it's up.position by the release cable. The spring is still visible but does not seem to have any tension on it....Thoughts ? Tim |
|
| Author: | Jbernier [ Mon Jun 01, 2020 2:07 pm ] |
| Post subject: | Re: Pro Angler 17t |
Hard to diagnose with such limited info - love to help better with more details - have you given your dealer a call perhaps they can take a look at it for you. |
|
| Author: | Jbernier [ Mon Jun 01, 2020 2:17 pm ] |
| Post subject: | Re: Pro Angler 17t |
Pull the rudder apart (2 small sister flat head screws) and check the spring / it's part # 84504001, if you need a new one order from a dealer. |
|
| Author: | Toolman [ Mon Jun 01, 2020 8:25 pm ] |
| Post subject: | Re: Pro Angler 17t |
Thanks guys, spoken to dealer so a clean out first and then see if a new spring is required. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|