| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Mounting a larger 12V battery (20Ah) http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=70476 |
Page 1 of 1 |
| Author: | The111 [ Sun Dec 18, 2022 3:11 pm ] |
| Post subject: | Mounting a larger 12V battery (20Ah) |
Hobie makes a battery mount that clamps to the mast, but it only fits smaller batteries. Mine is admittedly large: 20aH, roughly 7x7x3 (inches). See image below for my current cheesy way of mounting it (I drop it in the hole and use a couple more zipties to hold it to the mast. Looking for something a bit cleaner. Any ideas? https://imgur.com/a/kvLaIEH 
|
|
| Author: | oldyaker [ Tue Dec 20, 2022 11:58 am ] |
| Post subject: | Re: Mounting a larger 12V battery (20Ah) |
What about going inside... https://www.hobie.com/parts-and-accesso ... ry%5D=thru |
|
| Author: | The111 [ Wed Dec 21, 2022 12:27 am ] |
| Post subject: | Re: Mounting a larger 12V battery (20Ah) |
oldyaker wrote: What about going inside... https://www.hobie.com/parts-and-accesso ... ry%5D=thru Sorry if it wasn't clear, this is inside. When I say I'm attaching it to the mast with zipties, I mean like the same place the smaller batter bracket from Hobie goes: https://www.paddlerscove.com/12v-battery-holder-hobie/ Or like where this part goes: https://www.berleypro.com/product/kayak-emb/ I want to secure a much larger battery in that same location using something fancier than zipties and a pool noodle. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|