| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Plugging small holes in hull http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=70593 |
Page 1 of 1 |
| Author: | Deane [ Sat Feb 18, 2023 9:03 am ] |
| Post subject: | Plugging small holes in hull |
I'm wondering what techniques other people have tried for plugging old screw holes in kayak hulls. I have an Outback that I removed some hardware from and I've used silicone caulk in the past but without a backing it doesn't always hold well and doesn't look great. Has anybody tried plastic welding rods or anything else with better success? |
|
| Author: | Dr.SteelheadCatcher [ Tue Feb 21, 2023 8:00 am ] |
| Post subject: | Re: Plugging small holes in hull |
Yes and this form is full of information. Use the search feature located in the top right header under your topic. |
|
| Author: | Yakass [ Thu Mar 09, 2023 4:37 pm ] |
| Post subject: | Re: Plugging small holes in hull |
One really simple way to contend with small holes is to simply put a bolt or self tapper into it, with a little bit of silicone for good measure. It may just end up looking like its supposed to be there anyway, and doing this isn;t just easier than welding, its usually tidier as well. If you can get away with it, this is a pretty simple workaround |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|