If a plastic patch is out of the question, just put a couple of nice looking screws in the old screw holes and call it art!
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Patching a hole http://www.hobie.com/au/en/forums/viewtopic.php?f=11&t=7510 |
Page 1 of 1 |
| Author: | QM [ Mon Aug 06, 2007 4:02 am ] |
| Post subject: | Patching a hole |
I modded out my 07' Revo with an anchor trolley and would like to move the block back a bit. How can I patch the two screw holes I made? Can I match color? |
|
| Author: | QM [ Wed Aug 08, 2007 5:57 pm ] |
| Post subject: | Hole |
Come on, no one has any ideas. M Miller are you out there? I can't be the only one who has drilled a hole that I wish I hadn't. |
|
| Author: | sunjammers [ Wed Aug 08, 2007 6:54 pm ] |
| Post subject: | |
your going to need to get a patch kit from your dealer, a piece of hull to melt and a heat gun. we try to keep every color "sign" kayak in stock so we can cut chunks out and give to our customers to do repairs if need be. Call your dealer and see if they have any repair stick in stock. make sure you get a good fix before remounting your block |
|
| Author: | Roadrunner [ Wed Aug 08, 2007 11:53 pm ] |
| Post subject: | |
If a plastic patch is out of the question, just put a couple of nice looking screws in the old screw holes and call it art!
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|