| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Mast Identification http://www.hobie.com/au/en/forums/viewtopic.php?f=123&t=63399 |
Page 1 of 1 |
| Author: | offline [ Wed Aug 08, 2018 6:41 am ] |
| Post subject: | Mast Identification |
I have a mast that is labeled "Hobie Cat a Coleman Company" with a number of 24720 imprinted on the label and is approximately 313" in length. It's on a Holder 20 I picked up but is obviously not the original mast. I was wondering if it can be identified as to what it came off of? Thanks, Chris Edwards |
|
| Author: | srm [ Tue Aug 14, 2018 12:29 pm ] |
| Post subject: | Re: Mast Identification |
Hobie Cat purchased Holder in the mid-1980's and manufactured Holder monohulls under both the Holder and Hobie-One name. 313" equates to just over 26 feet, which sounds about the right mast length for a Holder 20. My guess is that it is the correct mast. sm |
|
| Author: | DVL [ Sun Nov 25, 2018 6:36 am ] |
| Post subject: | Re: Mast Identification |
Chris, My friend and I picked up a 1987 Holder 20, Hull 273 last spring, it was dormant for 12 years. We sailed it all summer and raced it once. Where are you located and if you need anything specific measured PM me. Yes everyone says they only made 265 hulls but I can tell you after owning Hobie's for 30+ years I know how to read hull serial numbers. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|