| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| T2 Hatch Covers http://www.hobie.com/au/en/forums/viewtopic.php?f=127&t=64298 |
Page 1 of 1 |
| Author: | NCRaginCajun [ Mon Feb 18, 2019 4:14 pm ] |
| Post subject: | T2 Hatch Covers |
I cannot find the parts list for the T2 online. The link above takes me to a generic page. Word on the street is many of the Getaway parts are interchangeable with the T2, is this true. Did find part numbers for a Getaway hatch, #41370001, 5" hatch. Could that be used as a T2 replacement? |
|
| Author: | mmiller [ Mon Feb 18, 2019 4:36 pm ] |
| Post subject: | Re: T2 Hatch Covers |
Correct. 40370001 |
|
| Author: | NCRaginCajun [ Thu Feb 21, 2019 11:35 am ] |
| Post subject: | Re: T2 Hatch Covers |
Thanks Matt. |
|
| Author: | BillFollyBeach [ Thu Nov 11, 2021 4:06 pm ] |
| Post subject: | Re: T2 Hatch Covers |
Matt: I am looking at a T2 but I am worried about parts. Are any or some or all inter-changeable with a H16 or the Getaway. I like the boat but I am concerned about getting replacement parts. I assume shrouds, sails and tramp can be bought at after market companies with no problem but what about a mast or something that is harder to replace? |
|
| Author: | mistro [ Thu Nov 11, 2021 10:00 pm ] |
| Post subject: | Re: T2 Hatch Covers |
Here's what I believe is correct: T2 specific parts: Hulls Trampoline Sails Other parts are from a mix of boats: Mast - H16 (with different base and mast head) Crossbars - F18 Tiger/Wildcat (probably T2 specific width and fittings) Rudders - standard EZ LOC (probably T2 specific rudder arms) Everything else is pretty generic or easily replaceable. I saw there are aftermarket tramps being made. Sails could probably be custom made if needed. So really, the big risk is the hulls themselves. My experience so far is they are tough as nails. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|