| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Hobie 18 SX Main Sheet length http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=1480 |
Page 1 of 1 |
| Author: | KennyB [ Sun Jan 23, 2005 7:17 am ] |
| Post subject: | Hobie 18 SX Main Sheet length |
Does anyone know what length a (Hobie 18 SX with wings) main sheet should be. I just bought a SX rig and have the stock SE main sheet. I'm also thinking about downsizing to 3/8", is that a good idea? |
|
| Author: | drej [ Sun Jan 23, 2005 8:55 am ] |
| Post subject: | |
Hi Kenny, The factory line diameter and length for the main sheet is 48' of 7/16 spun braid. This is according to the specifications found on the NAHCA website www.nahca.org (which redirects you to www.hcs-na.org). Click on Resources (across the top menu bar), then Technical Information...then select your boat. You will then see a link to Line Lengths. I am sure others would have recommendations for other diameters depending upon whether you have upgraded the blocks on the boat. I hope that helps! Drej |
|
| Author: | mmiller [ Sun Jan 23, 2005 10:18 am ] |
| Post subject: | Line lengths |
Line lengths are also included in the parts guides. There will be a part number and spec note for most evey line listed near its likely use area on each boat. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|