| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Removing Paint http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=24738 |
Page 1 of 1 |
| Author: | sigurdlee [ Sat May 15, 2010 6:52 pm ] |
| Post subject: | Removing Paint |
The hulls of my hobie 18 were painted with primer by the previous owner and then the refurb stalled for 10 years. The hulls are in good shape except a soft spot on the starboard hull forward of the rear crossbar. My question, heat gun, sanding or paint stripper and if paint stripper would citristrip negatively impact the yellow gel coat, other choices? |
|
| Author: | DVL [ Sun May 16, 2010 12:57 pm ] |
| Post subject: | Re: Removing Paint |
Paint stripper and a scotchbright pad first, then sandpaper. To me the heat and the foam under the glass don't mix. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|