| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Magnum wing question http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=26759 |
Page 1 of 1 |
| Author: | ncmbm [ Wed Jun 23, 2010 6:24 pm ] |
| Post subject: | Magnum wing question |
On the rear crossbar my wings have a stud only on port side and a U shaped bracket on starboard that covers the slot to feed the tramp in, along with a stud. Is the slug for the starboard side larger, all 4 new stud kits I bought are marked short slug? |
|
| Author: | Genmar Star [ Wed Jun 23, 2010 6:40 pm ] |
| Post subject: | Re: Magnum wing question |
I think my starboard slug is a little longer. I will check tommorow and make sure. |
|
| Author: | DVL [ Wed Jun 23, 2010 6:43 pm ] |
| Post subject: | Re: Magnum wing question |
I purchased my magnum wings used so I do not have the C shaped brackets on the crossbars. Yes the one rear slug is longer due to the clearance in the track. I use a stainless washer between the crossbar and the wing arm so not to chew up the crossbar when I rotate the wings up. I also use bolts instead of pins to hold them down as it stiffens the wings to the boat. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|