| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Trying To Complete My H18 http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=28857 |
Page 1 of 1 |
| Author: | ryman522 [ Tue Aug 03, 2010 9:11 pm ] |
| Post subject: | Trying To Complete My H18 |
I'm trying to get some finishing pieces for my Hobie 18. I have other catamarans so this has been an on going project but i want to get it on the water. If you have a parts boat, spare parts, or if you know someone who has some stuff I am looking for let me know. Im in college right now so i cant shell out a ridiculous amount of money and I am in no serious need to get this out on the water so lets work something out. Heres my list of needed parts: Rolling Furler Full batten set Black anodized boom Full rigging set (may want to buy new) Trampoline Mainsheet blocks Set of quick release pins Thanks in advance, Ryan |
|
| Author: | RobPatt [ Wed Aug 04, 2010 9:35 am ] |
| Post subject: | Re: Trying To Complete My H18 |
Where are you ? |
|
| Author: | MUST5429 [ Wed Aug 04, 2010 2:26 pm ] |
| Post subject: | Re: Trying To Complete My H18 |
I've got everything you need. Not sure what you would consider a ridiculous amount of money, but your list is pretty extensive, and some of that stuff isn't cheap. Where do you live is a pertinent question, some of those items, ( Boom and Battens ) are considered oversize items. Feel free to contact me off list I am in Colorado, and there may be someone closer that has what you need and might not cost as much to ship. Stephen [email protected] |
|
| Author: | ryman522 [ Wed Aug 04, 2010 11:41 pm ] |
| Post subject: | Re: Trying To Complete My H18 |
Sorry, I live in Minneapolis, MN. |
|
| Author: | HOBIE 911 [ Fri Aug 06, 2010 9:41 am ] |
| Post subject: | Re: Trying To Complete My H18 |
I have a Hobie factory white vinyl tramp. Used only a couple of months. 9 out of 10 condition. No rips tears etc. gromets like new!!! $250 delivered to your door. Email for pics if interested. I bought this new then found a new yellow one to match my boat. Jim. |
|
| Author: | HOBIE 911 [ Fri Aug 06, 2010 4:32 pm ] |
| Post subject: | Re: Trying To Complete My H18 |
Jim here again. Just checked my parts locker, I have a set of shrouds and bridle wires in good shape no rust, no "pinged/broken" strands black coated I will throw in as a bonus with the tramp if interested |
|
| Author: | ryman522 [ Fri Nov 26, 2010 12:21 am ] |
| Post subject: | Re: Trying To Complete My H18 |
Rolling Furler Full batten set Black anodized boom Full rigging set (may want to buy new) Trampoline Mainsheet blocks Set of quick release pins I have purchased the batten set, rigging, and trampoline. I still need the Jib assembly (forstay, furler, and halyard system) and I need the black anodized boom with mainsheet blocks. MUST5429 - I have had some serious email troubles with setting up my college email and syncing it with my laptop..(many previous emails deleted) I still want to buy iyour boom and mainsheets if still available. I will send you another email if you dont check this.. |
|
| Author: | railsnsails [ Tue Dec 07, 2010 7:31 am ] |
| Post subject: | Re: Trying To Complete My H18 |
I have a "parts" boat and can provide you with a boom with blocks, outhaul, roller furler (upper and lower), bridle for furler lower unit, and forestay. Let me know if you're all set or still need the parts. You can email me direct at [email protected]. Fritz |
|
| Author: | Sail Revolution [ Tue Dec 07, 2010 9:18 pm ] |
| Post subject: | Re: Trying To Complete My H18 |
I've got a used black anodized boom and a full batten set. [email protected] |
|
| Author: | ryman522 [ Sat Apr 09, 2011 11:13 pm ] |
| Post subject: | Re: Trying To Complete My H18 |
Jeremy, Just saw your post, thank you for the offer but I picked one up already My list is complete and I just want to thank everyone for their help. Will post pictures when I put the boat back together. I am in need of 5 pairs of anchor plate kits... if you have a parts boat with a couple pairs let me know. I cant really afford 5 x $36 at the moment! Also, I am replacing all lines including halyards and tramp lacing.. Are rope packages such as from salty-dog worth it, or would it be less expensive just to get the ropes on my own? I just seems a bit more convinent to order them in a pre-cut to length package. |
|
| Author: | ryman522 [ Sat Jun 04, 2011 8:05 pm ] |
| Post subject: | Re: Trying To Complete My H18 |
Had my first sail today and have a couple questions. First off I want to switch to the mast step with the 4 rivets. Is that part # 60180011 Is there a longer post for the newer type of mast step, or is it the same post? |
|
| Author: | centralmichigansailor [ Sun Jun 05, 2011 2:32 am ] |
| Post subject: | Re: Trying To Complete My H18 |
The posts are different in the fashion they connect to the crossbar casting. New style is better. |
|
| Author: | MUST5429 [ Sun Jun 05, 2011 7:17 am ] |
| Post subject: | Re: Trying To Complete My H18 |
I was thinking that too. I did the conversion for a friend a few years back, and while I cannot remember exactly what the difference is, I would order the rod along with the casting. Stephen |
|
| Author: | centralmichigansailor [ Sun Jun 05, 2011 6:59 pm ] |
| Post subject: | Re: Trying To Complete My H18 |
To clarify, I am 99% sure that the posts do not interchange...you will need to order a new post for the 4-hole base. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|