| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| mast anchor http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=3054 |
Page 1 of 1 |
| Author: | JonBrown2989 [ Thu Feb 16, 2006 7:55 pm ] |
| Post subject: | mast anchor |
the bottom of the mast where it connects to the boat on the boat it is not riveted into the beam it is just sitting there on top i dont think this is right and how should i go about fixing it? i thought about redrilling holes and reriviting it in and then using hose clamps on either side over the dolphin striker anybody think this will work or any more suggestions thanks agian Jonathan Niceville,Fl |
|
| Author: | Hobie Nick [ Tue Feb 21, 2006 9:21 pm ] |
| Post subject: | |
If you are talking about the cup on the front crossbeam that accepts the mast base (called the mast step) I would forego the hose clamps and just redrill and rerivit it to the crossbeam. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|