Taken from a bit far away, buts heres my new spin in light air on Clearlake CA.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| H18 spin http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=36204 |
Page 1 of 1 |
| Author: | kiwi [ Tue Jun 14, 2011 12:16 pm ] |
| Post subject: | H18 spin |
Taken from a bit far away, buts heres my new spin in light air on Clearlake CA.
|
|
| Author: | RobPatt [ Tue Jun 14, 2011 1:00 pm ] |
| Post subject: | Re: H18 spin |
Awesome, congrats. Where do you recommend running sheet blocks? Pole length? Snuf mid-or end or on the tramp? Sail size, where' dyou get it ? I'm going to rig an F17 spin as a winter project.... |
|
| Author: | Chet3 [ Tue Jun 14, 2011 1:27 pm ] |
| Post subject: | Re: H18 spin |
Looks very nice, I would like to rig a spin on my 18 some day. No $ or effort at this time, just a dream. |
|
| Author: | kiwi [ Tue Jun 14, 2011 2:14 pm ] |
| Post subject: | Re: H18 spin |
RobPatt wrote: Awesome, congrats. Where do you recommend running sheet blocks? Pole length? Snuf mid-or end or on the tramp? Sail size, where' dyou get it ? I'm going to rig an F17 spin as a winter project.... I'm running the sheet blocks off the shrouds and the second pair on the forward crossbar. All are harken 57mm ratchamatics Pole is 12' 2", the tack is at 12', the 2" just gives me room to mount a telocat. I made the pole, its just some 1.5" 120 wall I picked up for $35 at the local steel supply yard. The snuffer is a tiger mid pole. Sail is a Whirlwind |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|