(broken) p19 mast base, probably a bit different since 18.2 and 19 are different from 16 and 18, but should be similar.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| will a H18 mast base fitting fit on a P-18 mast extrusion? http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=36462 |
Page 1 of 1 |
| Author: | RobPatt [ Wed Jun 29, 2011 12:03 pm ] |
| Post subject: | will a H18 mast base fitting fit on a P-18 mast extrusion? |
anyone know offhand if the mast step/base for an H18 will fit the extrusion of a prindle 18 mast ? thx. |
|
| Author: | ncmbm [ Thu Jun 30, 2011 5:59 am ] |
| Post subject: | Re: will a H18 mast base fitting fit on a P-18 mast extrusio |
I don't think so, seems the Prindle extrusion is more round and not teardrop shaped. You might be able to machine it to fit. |
|
| Author: | RobPatt [ Thu Jun 30, 2011 7:20 am ] |
| Post subject: | Re: will a H18 mast base fitting fit on a P-18 mast extrusio |
i'll check it out this weekend... seems the P18 solid alu mast may be a decent option for an all alu H18SX sized mast... I think the P18 is a few inches shorter than the SX mast, but about 9 inches larger than the standard H18. Of course not sure about shrouds/forestay. Like I said, looking into it. |
|
| Author: | srm [ Thu Jun 30, 2011 8:54 am ] |
| Post subject: | Re: will a H18 mast base fitting fit on a P-18 mast extrusio |
If the Prindle mast is 9" longer than an 18SE mast, then it's 9" shorter than an 18SX mast. The 18SX mast is 18" longer than a stock 18 mast IIRC. sm |
|
| Author: | matt922 [ Thu Jun 30, 2011 7:47 pm ] |
| Post subject: | Re: will a H18 mast base fitting fit on a P-18 mast extrusio |
(broken) p19 mast base, probably a bit different since 18.2 and 19 are different from 16 and 18, but should be similar. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|