I might have a lead on one of those caddies, but it is mounted on the forward mast support and not clamped to the rear tramp rack....
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| những hiện tượng cho cảm thấy trẻ bị mắc chứng chậm nói http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=64180 |
Page 1 of 1 |
| Author: | Bill 404 [ Fri Jan 18, 2019 5:56 pm ] |
| Post subject: | Re: Mast Caddy |
I might have a lead on one of those caddies, but it is mounted on the forward mast support and not clamped to the rear tramp rack....
|
|
| Author: | StickiestLizard [ Sun Jan 20, 2019 2:53 pm ] |
| Post subject: | Re: Mast Caddy |
Oooooo Like one oo Sent from my iPhone using Tapatalk |
|
| Author: | gogatrz [ Mon Jan 28, 2019 4:17 pm ] |
| Post subject: | Re: Mast Caddy |
I made my own for my Hobie 18 which fits into the rear crossbar track. Made out of 8"plumbing PVC 2- 'T' sections with a threaded center section to hold them together. Cut out a one inch section across one 'T' section (on one edge) to align in the crossbar track. Screw the other 'T' above it with the threaded section and cut out a 'V' into the top of the upper 'T' section PVC. Line it with some carpeting. Gives me sufficient height to clear my rudder crossbar. Secure it with bungees across the top of the mast down to the tramp. You can send me your contact info and I'll forward a pic to you. cheers |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|