| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| comptip how big is it http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=6754 |
Page 1 of 1 |
| Author: | sailor33133 [ Wed May 16, 2007 5:29 pm ] |
| Post subject: | comptip how big is it |
I have a 18 with a broken mast the mast broke about a foot above the jib /forestay fitting does the comptip extend far enuff to repair my mast??? |
|
| Author: | mmiller [ Thu May 17, 2007 10:41 am ] |
| Post subject: | Yes |
Yes, the CompTip inserts just above the tang / hound. |
|
| Author: | sailor33133 [ Mon May 21, 2007 12:22 pm ] |
| Post subject: | |
are all the tips the same size and lenght will a tip for a 16 fit on a 18 mast is a 16 tip as long as a 18 tip or is each mast a different shape and or lenght |
|
| Author: | MBounds [ Mon May 21, 2007 1:27 pm ] |
| Post subject: | |
H-16 and H-18 Comptips are fundamentally different. 16 Comptip is straight. 18 Comptip is tapered. Not interchangeable. |
|
| Author: | sailor33133 [ Wed Aug 22, 2007 6:20 am ] |
| Post subject: | comp tip exact size |
can any one with a comptip messure the part for me for a 18 normal need details are total lenght amount inside the alloy mast [overlap] top dia [as the bottom must fit in the mast so is known] sheve pin to top any other cridical distance?? |
|
| Author: | John Wirth [ Wed Aug 22, 2007 9:46 am ] |
| Post subject: | |
Is yours an 18 or 18SX? I am told the SX is about a foot and a half taller. Is the foot and a half additional length in the aluminum extrusion, the comtip, or partially in both? |
|
| Author: | ncmbm [ Thu Aug 23, 2007 9:51 am ] |
| Post subject: | |
Its in the extrusion, both use the same crap-tip. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|