Hobie Forums http://www.hobie.com/au/en/forums/ |
|
Ok, who made a twin mast Hobie 18...? http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=69629 |
Page 1 of 1 |
Author: | TAMUmpower [ Wed Mar 23, 2022 4:11 pm ] |
Post subject: | Ok, who made a twin mast Hobie 18...? |
https://www.yachtworld.com/yacht/2020-c ... d-7474296/ Its for sale for only 20K lol. Someone has to know who this crazy person is. I call BS that the hulls are carbon though. Who in FL has H18 hull molds anyway ![]() ![]() ![]() ![]() ![]() ![]() |
Author: | Waiex191 [ Thu Mar 24, 2022 7:34 pm ] |
Post subject: | Re: Ok, who made a twin mast Hobie 18...? |
I know a few people in the Stuart area that could make their own molds and make carbon hulls. I'll ask my buddy who gave me a Supercat 17. He lives in Stuart. Lots of Sikorsky people in that area. |
Author: | yaw_string [ Fri Mar 25, 2022 10:23 am ] |
Post subject: | Re: Ok, who made a twin mast Hobie 18...? |
There is a cabin cruiser cat about twice that size rigged that way in Australia. You might want to search for that buyers blog of living with it for several years and see if the drawbacks he mentioned would apply to you. One issue was the downwind boom could be hanging way out over the water and hard to access rigging. Of course the one depicted here has simplified booms/sprits. |
Author: | TAMUmpower [ Fri Mar 25, 2022 4:19 pm ] |
Post subject: | Re: Ok, who made a twin mast Hobie 18...? |
yaw_string wrote: There is a cabin cruiser cat about twice that size rigged that way in Australia. You might want to search for that buyers blog of living with it for several years and see if the drawbacks he mentioned would apply to you. One issue was the downwind boom could be hanging way out over the water and hard to access rigging. Of course the one depicted here has simplified booms/sprits. Lol don’t worry I’m not dumb enough to want this thing. Let alone spend 20k on it haha |
Author: | flatlander [ Tue Mar 29, 2022 10:03 am ] |
Post subject: | Re: Ok, who made a twin mast Hobie 18...? |
If it takes three guys to sail it.... I'm OUT ! ![]() |
Author: | srm [ Tue Mar 29, 2022 12:17 pm ] |
Post subject: | Re: Ok, who made a twin mast Hobie 18...? |
Three guys to sail it and they all have to be on the low side to get it to fly a hull…. ![]() sm |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |