| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Forward crossbar mast step casting http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=8507 |
Page 1 of 1 |
| Author: | wwkbob [ Sun Dec 30, 2007 6:33 pm ] |
| Post subject: | Forward crossbar mast step casting |
The rivets that fasten the mast step casting to the forward crossbar are slightly loose allowing the casting to wiggle. Should I replace the rivets and if so what size are they? |
|
| Author: | The Dog [ Mon Dec 31, 2007 9:28 am ] |
| Post subject: | |
8010131 - 6-6 Panhead Monel. There'd have to be a lot of play before I jacked with it. Mast step repair and/or replacement is a PITA. Brian C |
|
| Author: | Adrio [ Mon Dec 31, 2007 4:53 pm ] |
| Post subject: | |
what do you consider a "lot of play"? I only notice it on mine down wind in a very light breeze when things are "flopping" about. |
|
| Author: | The Dog [ Mon Dec 31, 2007 8:55 pm ] |
| Post subject: | |
A "lot of play" is subjective. If I thought the movement was enough to cause the dolphin striker to elongate the hole in the front crossbar, I'd fix it. But that probably wouldn't happen till the rivets failed.... Probably. Brian C |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|