| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Holes in the crossbar http://www.hobie.com/au/en/forums/viewtopic.php?f=13&t=9087 |
Page 1 of 1 |
| Author: | Skipshot [ Mon Apr 07, 2008 8:02 pm ] |
| Post subject: | Holes in the crossbar |
To replace the tramp I needed to remove a wing bracket from the rear crossbar by drilling out the rivets. The wings on my 18SX are damaged and I'm not in a hurry to fix them so I didn't replace the wing bracket. My question is: Do the holes on the crossbar need to be plugged? |
|
| Author: | gofastshawn [ Tue Apr 08, 2008 7:23 pm ] |
| Post subject: | |
It is not a necessity but I would if it was me,especially if you are in the estuary or the bay much. Shawn 82 h18 #8211 div3 |
|
| Author: | MUST5429 [ Wed Apr 09, 2008 7:46 am ] |
| Post subject: | |
I sold the wings off of a boat I used to own. I just put a small amount of silicone in the holes, and wiped the excess off of the outside of the crossbar. Made a nice clean quick easy fix and lasted for 3 or 4 years that I know of. Stephen H-18 |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|