Hobie Forums
http://www.hobie.com/au/en/forums/

Extended 'Deck Padding'
http://www.hobie.com/au/en/forums/viewtopic.php?f=134&t=58261		 Page 1 of 1
Author:  RogWild [ Sat Jul 09, 2016 9:23 pm ]
Post subject:  Extended 'Deck Padding'
A note that came with my 12' Eclipse stated that the early models did not have additional decking pads forward near the Handlebar mounts..... and that 'upgrade kits' would be sent to add them. Are there any pictures of what the 'current configuration' looks like? And WHEN can we expect the 'upgrade kits' to be available, or shipped? :?:
All the pictures that I see 'online', and in the brochure, show two small strips of deck pad on either side of the handlebar shaft. Is this the 'old' or 'current' configuration? Image
Author:  johnnybravo [ Sun Jul 10, 2016 3:45 am ]
Post subject:  Re: Extended 'Deck Padding'
My arrived with additional EVA pad, this is the new one.
Image
Author:  mmiller [ Sun Jul 10, 2016 8:12 am ]
Post subject:  Re: Extended 'Deck Padding'
Likely starting to ship this week.
Author:  SailScott [ Thu Jul 14, 2016 8:03 am ]
Post subject:  Re: Extended 'Deck Padding'
What is the process for getting the upgrade kits?
Thanks.
Author:  RogWild [ Fri Jul 15, 2016 8:22 pm ]
Post subject:  Re: Extended 'Deck Padding'
They said, "be sure to register", and the 'upgrade' would be sent. Guess they can tell by our serial number..... if it is older and requires the kit. Anyone getting theirs..... please let the forum know.
Author:  mmiller [ Sat Jul 16, 2016 11:02 am ]
Post subject:  Re: Extended 'Deck Padding'
We shipped pads to those on the registered list this week. Dealers will get the rest, so if not in the mail... See your dealer.
Author:  RogWild [ Sun Jul 17, 2016 10:23 am ]
Post subject:  Re: Extended 'Deck Padding'
I hope the 'pads' come with installation instructions..... I sure would hate to get it on 'crooked'!
Author:  RogWild [ Mon Aug 08, 2016 2:04 pm ]
Post subject:  Re: Extended 'Deck Padding'
Got mine, in the mail. Checked 'Install Video'.... easy, and went on 'straight'! :P HINT: with the paper backing removed; slightly bend the ends of the pad toward you. Center the 'cutout hole' over the handlebar base (leaving equal amounts of colored decking on all sides). Press the center down, and gradually work your way out to the corners.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/