I installed them recently on my 2018 compass. Picked up SS screws, washers, and nuts at Home Depot. I have the rectangular hatch installed so access is a little easier. Installation wasn’t hard, but reaching in with a ratchet while screwing from the top is a pain. I had to back the handle screws out some because the screws for them were in the way of the ratchet, I didn’t remove them - just backed them out about half way. Overall, a fairly easy install but like most things inside the hull, it can be bit tedious. I did have to cut the stitching on the seat strap loops so they were long enough to adjust.
BTW, I’m happy with the risers. I’m able to fit my tackle box under the seat now with room to spare.
|