Hobie Forums
http://www.hobie.com/au/en/forums/

Compass Side Imaging Fish Finder
http://www.hobie.com/au/en/forums/viewtopic.php?f=138&t=64421		 Page 1 of 1
Author:  benqueso [ Thu Mar 21, 2019 6:30 pm ]
Post subject:  Compass Side Imaging Fish Finder
Does anyone have a side imaging fish finder on the Compass? Do the left and ride side of the bottom hull interfere with the signal at all?

It appears in videos/pictures that the left/ride side of the bottom hull are slightly lower than the 2019 Outback but I'm not sure since I just have a Compass.

I'm looking into getting a Hummingbird Helix SI finder and using the BerleyPro mount.
Author:  LagunaFisher [ Mon Apr 01, 2019 1:15 pm ]
Post subject:  Re: Compass Side Imaging Fish Finder
I'm in the process of Installing a Lowrance HDS touch gen2 I was given. I'm installing the structure scan transducer on a RAM arm. This unit requires 2 transducers and I'll put the smaller one in the lowrance pod and the structure scan on an arm. Looking forward to trying it out.
Author:  felvic [ Sat Apr 06, 2019 2:20 am ]
Post subject:  Re: Compass Side Imaging Fish Finder
benqueso wrote:
Does anyone have a side imaging fish finder on the Compass? Do the left and ride side of the bottom hull interfere with the signal at all?

It appears in videos/pictures that the left/ride side of the bottom hull are slightly lower than the 2019 Outback but I'm not sure since I just have a Compass.

I'm looking into getting a Hummingbird Helix SI finder and using the BerleyPro mount.


If you mean to put the transducer in the transducer Lowrance ready hole, it won't work...
Author:  LagunaFisher [ Wed Apr 10, 2019 1:41 pm ]
Post subject:  Re: Compass Side Imaging Fish Finder
I installed the Lowrance Gen 2 7 touch and it works perfectly using the structure scan transducer on a ram arm. The smaller transducer installed into the Hobie Lowrance pocket perfectly. I don't need the structure scan when fishing the flats, so it's nice to be able to remove it when I don't need it.
Author:  John Spear [ Sat Apr 20, 2019 2:01 am ]
Post subject:  Re: Compass Side Imaging Fish Finder
benqueso wrote:
Does anyone have a side imaging fish finder on the Compass? Do the left and ride side of the bottom hull interfere with the signal at all?

It appears in videos/pictures that the left/ride side of the bottom hull are slightly lower than the 2019 Outback but I'm not sure since I just have a Compass.

I'm looking into getting a Hummingbird Helix SI finder and using the BerleyPro mount.


I also looking forward to this, previously I took to the shop and mounted for them, really looking forward to how to do it myself perfectly :)
Author:  Jax Kayak Mafia [ Sun Apr 21, 2019 5:26 pm ]
Post subject:  Re: Compass Side Imaging Fish Finder
I have mounted the a triple shot under the compass and it works great.No issues at all.
Author:  DaveS [ Tue Apr 23, 2019 7:02 am ]
Post subject:  Re: Compass Side Imaging Fish Finder
Max, did you buy a different transducer 'cover' plate (with modified 'bulge')?

Or are you using the Compass factory transducer cover?
Author:  HStrech [ Mon Apr 29, 2019 11:03 am ]
Post subject:  Re: Compass Side Imaging Fish Finder
The Lowrance Tripleshot units are the easiest to install using Hobie parts. Here's the plate you need:

Image
72020220
MOUNT KIT, TRIPLESHOT

BerleyPro has transducer mounts that adapt right over the Lowrance Ready cavities on Hobie kayaks for all other brands.
Author:  DaveS [ Wed May 08, 2019 11:47 am ]
Post subject:  Re: Compass Side Imaging Fish Finder
Hstrech, does that cover (protect) entire transducer, or does transducer stick out the back?
I'm looking at an hds7 carbon, but I've never used side scan before. I do a fair bit of dragging of my hull, though and am worried about anything lower than existing factory transducerducer cover
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/