I cut off the corners of the Garmin piece and the back posts of the Hobie plate. It's secured with 3 zip ties.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Will a Garmin Striker 4 CV Transducer fit? http://www.hobie.com/au/en/forums/viewtopic.php?f=138&t=65962 |
Page 1 of 1 |
| Author: | jeffreyrichard [ Tue Jan 07, 2020 2:45 pm ] |
| Post subject: | Will a Garmin Striker 4 CV Transducer fit? |
Trying to determine if a Garmin Striker 4 CV ... with the extended 6 inch transducer ... will fit in the Compass' transducer mount ... |
|
| Author: | benqueso [ Tue Jan 07, 2020 4:48 pm ] |
| Post subject: | Re: Will a Garmin Striker 4 CV Transducer fit? |
Fits but you have to cut the Hobie plate a bit with a dremel or something. |
|
| Author: | jeffreyrichard [ Wed Jan 08, 2020 8:57 am ] |
| Post subject: | Re: Will a Garmin Striker 4 CV Transducer fit? |
benqueso wrote: Fits but you have to cut the Hobie plate a bit with a dremel or something. Can you elaborate? Do you mean the posts, or something else? |
|
| Author: | benqueso [ Wed Jan 08, 2020 11:29 am ] |
| Post subject: | Re: Will a Garmin Striker 4 CV Transducer fit? |
I cut off the corners of the Garmin piece and the back posts of the Hobie plate. It's secured with 3 zip ties.
|
|
| Author: | jeffreyrichard [ Fri Jan 17, 2020 9:25 am ] |
| Post subject: | Re: Will a Garmin Striker 4 CV Transducer fit? |
benqueso wrote: I cut off the corners of the Garmin piece and the back posts of the Hobie plate. It's secured with 3 zip ties. Thanks for this info ... Did you happen to see the PM I sent you? ... was hoping for some more detail ... many thanks |
|
| Author: | TarrenceRobertson [ Wed Sep 02, 2020 4:44 am ] |
| Post subject: | Re: Will a Garmin Striker 4 CV Transducer fit? |
benqueso wrote: I cut off the corners of the Garmin piece and the back posts of the Hobie plate. It's secured with 3 zip ties. garmin phone number Please tell me if I do the same will my warranty expire? |
|
| Author: | mmiller [ Wed Sep 02, 2020 6:44 am ] |
| Post subject: | Re: Will a Garmin Striker 4 CV Transducer fit? |
Modifying the plate would not affect the hull in any way I would think. The only thing we would not warranty would be directly related to this modification. If it stressed some other part or caused damage it might not be covered, but modifications do no "void" warranty. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|