| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Mirage drive leash tether point question http://www.hobie.com/au/en/forums/viewtopic.php?f=138&t=66472 |
Page 1 of 1 |
| Author: | Beacher [ Tue May 05, 2020 1:42 pm ] |
| Post subject: | Mirage drive leash tether point question |
Hi all, Now that I have joined the ranks of Hobie owners this past weekend, I need to join the ranks of owners who mod their rides.... I see that Hobie sells a leash for the mirage drive and that it mounts to a pre-existing set of screw holes on the right hand side of the yak. Does anyone know the specs for those holes? What size pad eye and screws could I order from somewhere that would work? I have made my own leash already using the trimmer line method. Just need to attach it somewhere safe! Thanks in advance! -Beacher 2020 Hobie Compass |
|
| Author: | Sangorei [ Mon May 11, 2020 9:31 am ] |
| Post subject: | Re: Mirage drive leash tether point question |
For all of our Hobies, I use 50 lb zap straps and bungy cords. I zap strap a loop to a bungy which I then zap strap to the little knob in front of the kayak just below the hole for the sail. On the other end of the bungy I zap strap a loop with a brass clip. On the pedals I tie off a bungy with a loop. In use I can clip and unclip the bungy to the pedals. I find the weedeater stuff too tangly myself. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|