| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Pylons height over hulls http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=10675 |
Page 1 of 1 |
| Author: | can motril [ Tue Sep 09, 2008 12:52 pm ] |
| Post subject: | Pylons height over hulls |
Hello, my H16 have a break in one of the corner casting so i decide to dismantle it. Then i saw that the pylons have damages in their screw holes and one of the aft pylon is higher than the other !! The bow pylons are higher than the aft (ok) i´m going to repair it with weldind an aluminium sheet, filling and re-drilling the holes. I think that the corner break is due to a torsion in the trampoline (and the damages holes) Could anyone tellme which are the height of the aft and bow pylons over the hulls to check and repair it? thanks from Spain and thanks a lot if you give it to me in centimeters. Sorry for my english |
|
| Author: | mmiller [ Thu Sep 11, 2008 9:12 am ] |
| Post subject: | |
I do not have a drawing that shows the dimensions requested. I will try to get over to the factory area and check for you. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|