google is your friend
http://www.harken.com/rigtips/Reeving_D ... -1-Cam.php
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Harken 6.1 http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=11803 |
Page 1 of 1 |
| Author: | Gerry McMahon [ Wed Feb 18, 2009 9:41 am ] |
| Post subject: | Harken 6.1 |
does anyone have a diagram for threading Harken 6.1 main sheet blocks please. thanks Gerry |
|
| Author: | J_Eaton [ Wed Feb 18, 2009 9:53 am ] |
| Post subject: | |
google is your friend http://www.harken.com/rigtips/Reeving_D ... -1-Cam.php
|
|
| Author: | Roy [ Wed Feb 18, 2009 8:23 pm ] |
| Post subject: | |
Except you can't tie off one end of the line at the block like that unless you run a separate line for the main traveler. |
|
| Author: | MBounds [ Wed Feb 18, 2009 8:35 pm ] |
| Post subject: | |
???? That's what the other end of the mainsheet is used for. (After #6) |
|
| Author: | mmadge [ Thu Feb 19, 2009 6:25 am ] |
| Post subject: | |
Some of the racer guys are rigging it this way.Apparently it corrects some of the twisting problems 
|
|
| Author: | jco [ Thu Feb 19, 2009 2:41 pm ] |
| Post subject: | repost |
repost that picture please |
|
| Author: | gary eudy [ Thu Feb 19, 2009 4:16 pm ] |
| Post subject: | |
When i bought my harken 6:1 blocks i brought them to work Room was full of civil engineers very very funny watching each one try to rig and then fail one after another |
|
| Author: | Sail Revolution [ Thu Feb 19, 2009 6:24 pm ] |
| Post subject: | |
And whose got a pic of the other way where it goes through the side plate and ties off above the cam? J |
|
| Author: | Roy [ Sun Feb 22, 2009 7:27 am ] |
| Post subject: | |
Duh--- boy am I very stupid!!  
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|