| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Trapeze shock cord - thicker or thinner? http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=11930 |
Page 1 of 1 |
| Author: | localizer [ Sun Mar 08, 2009 4:00 pm ] |
| Post subject: | Trapeze shock cord - thicker or thinner? |
I'm replacing my trap return shock cord and I have two cords - 1/4" and a thicker one, don't remember how thick, but I can still fit it in the hooks. Which one should I go with? |
|
| Author: | mmiller [ Mon Mar 09, 2009 2:09 pm ] |
| Post subject: | |
1/4" shock cord is standard replacement. Current H16 production is using 5mm. |
|
| Author: | localizer [ Mon Mar 09, 2009 4:12 pm ] |
| Post subject: | |
Thanks a lot, Matt! |
|
| Author: | gary eudy [ Sun Mar 15, 2009 4:57 pm ] |
| Post subject: | |
Try the MURRAYS Marine black shock cord It is the best I have ever found I agree with Matt on the size I tried to use some real thick cord bigger is always better but not in this case It did build my legs up Gary |
|
| Author: | sunvista [ Mon Mar 16, 2009 6:24 am ] |
| Post subject: | |
Buy them prefabricated with the Nexus closed hooks. The cheaper nylon snap hooks become disconnected easily. |
|
| Author: | guthormsen [ Sat Mar 21, 2009 10:55 am ] |
| Post subject: | |
Where would you acquire them prefabed as you mentioned? Dale |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|