| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Mast top Pulley http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=13160 |
Page 1 of 1 |
| Author: | sshaver [ Tue Jul 21, 2009 6:40 pm ] |
| Post subject: | Mast top Pulley |
guys, I have an issue after capsizing last week, my mast top pulley is jammed with gravel, clay and sand and the pulley wheel will not spin anymore. I have had the mast top off and in a bucket of water for a week now. I keep trying to work the wheel free, but this think is not budging. I have taken off my old mast top from an old damaged mast. but now I have no idea how to get the mainsail halyard through with that big end on one side and the shackle on the other side. So I can's move this to the other mast top. Any info would be greatly appretiate it. |
|
| Author: | getwetsailing [ Fri Jul 31, 2009 11:24 am ] |
| Post subject: | Re: Mast top Pulley |
If I where you, You could either drill out the machine rivet, and pull the wheel out, then clean ti out, and put the wheel back on with a bolt. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|