Hobie Forums
http://www.hobie.com/au/en/forums/

Hull Failure!!
http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=13308		 Page 1 of 1
Author:  mdgann [ Wed Jul 29, 2009 9:25 am ]
Post subject:  Hull Failure!!
Has anyone here ever experienced a hull failure? I have heard people talk of the possibility with softspots in the hulls, but I have never seen it happen or even talked to someone who has. Anyone?
Author:  Little Wing [ Wed Jul 29, 2009 10:26 am ]
Post subject:  Re: Hull Failure!!
Yes and what do you want to know?
Author:  MBounds [ Wed Jul 29, 2009 10:29 am ]
Post subject:  Re: Hull Failure!!
Image

Photo's a little old - 1988, but that boat was only 10 years old. Classic soft spot in the deck caused catastrophic failure during a race on Lake Michigan. Boat mostly sank, rig came down. Fortunately, nobody was hurt. Insurance company totaled the boat.
Author:  Tom Machette [ Wed Jul 29, 2009 10:49 am ]
Post subject:  Re: Hull Failure!!
Our first H16 was in a hail storm that caused delamination on the top of the hull. The hull ended up breaking off right in front of the pylon (like Mbounds pic). No one was hurt, but the boat had to be sailed back to the beach with the broken hull out of the water,so it wouldn't sink. The hull broke off during a tack where the tension in the bridal was the greatest.
Author:  FrankenHobie [ Sat Aug 29, 2009 4:29 am ]
Post subject:  Re: Hull Failure!!
I just recently bent the front end of my starboard hull while on starboard tack in heavy winds. I had soft spots in the hull and out of ignorance did not fix them. On hull 2 now and working on reinforcing with epoxy. I would not recommend taking chances :p
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/