| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 1980 H-16 Hulls (white) and Parts http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=16026 |
Page 1 of 1 |
| Author: | surfsailor [ Sun Oct 18, 2009 5:36 am ] |
| Post subject: | 1980 H-16 Hulls (white) and Parts |
Have two 1980 intact Hobie Cat 16 Hulls (port and starboard) in Wilmington NC. Good shape with virtually no wear on the bottoms, Yeah I was surprised too (gel coat is still intact) White color. No soft spots or delamination. Solid hulls. $250.00/each Dolphhin Striker ($34.00) w/ post ($22.00) and mast step($41.00) Rear (aft) Crossbar($100.00) w/ Track($50.00) and Car ($30.00) Courner castings (port and starboard) ($75.00/each) Swivel Cam Cleat, Pad Eye with dead eye($32.00) Side bar (port) ($70.00) Have some other Hobie Cat 16 Parts Including older ok Sails, boom, rigging, rudders, tramp, etc just ask.....Thanks |
|
| Author: | hbauguess123 [ Mon Oct 19, 2009 6:53 am ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
I live in NC and am looking for black rudders? Do you have any i just need one, mine cracked and now i have one black and one white. Thanks |
|
| Author: | surfsailor [ Mon Oct 19, 2009 8:12 am ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
sorry no epo's. only have the standard nylon rudders. |
|
| Author: | hbauguess123 [ Mon Oct 19, 2009 8:40 am ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
no i don't want the epo's just the older black nylon ones. |
|
| Author: | clend692 [ Mon Oct 19, 2009 9:09 am ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
how old is the rigging and tramp, and what kind of shape is the tramp in? I also need a single trap if you got one? thanks! |
|
| Author: | bassie1234567 [ Mon Oct 19, 2009 7:39 pm ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
Hey, I need newer standing rigging (shrouds ), a jib Hallyard, and trapeze harness, you have any of those available? |
|
| Author: | surfsailor [ Tue Oct 20, 2009 3:32 pm ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
The side stays are also old and have some cable frey but should hold if your desperate, fore stay is in good shape just let me know what you would need as there are parts attached, shackles, halyard, pully, etc. Have several single good shape (one side each, port and starboard) trapeez lines with handles and J&H brand/style dogbones. Thanks Vic |
|
| Author: | Nevek [ Wed Oct 21, 2009 6:57 pm ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
where are you located? |
|
| Author: | bassie1234567 [ Wed Oct 21, 2009 7:39 pm ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
Denver, i just ordered parts from the Jib Hallyard (was only 20 bucks), but i still need the metal part of the Jib hallyard, do you have that? |
|
| Author: | surfsailor [ Thu Oct 22, 2009 1:48 am ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
Bassie, I Dont know who this Keven dude is, Asking where your at!? Dont know what you mean by metal part. Do you have a Hobie catalog? If you do just give me the part numbers that you need from the back of the book. If not call me up or Em me specifics and I can get you what you need, hopefully you'll be back out ripping it up soon. Surfsailor Vic |
|
| Author: | surfsailor [ Thu Oct 22, 2009 1:54 am ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
Bassie, I also have trapeeze cables if you want them, I think you should have them on the H-16. Nothing more fun than trapping out on that boat. Let me know Surfsailor Vic |
|
| Author: | Nevek [ Thu Oct 22, 2009 11:46 am ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
surfsailor wrote: Bassie, I Dont know who this Keven dude is, Asking where your at!? Dont know what you mean by metal part. Do you have a Hobie catalog? If you do just give me the part numbers that you need from the back of the book. If not call me up or Em me specifics and I can get you what you need, hopefully you'll be back out ripping it up soon. Surfsailor Vic I didnt see you listed NC as your location....sorry? |
|
| Author: | bassie1234567 [ Thu Oct 22, 2009 12:58 pm ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
well, for anyone interested then, I need the Jib Halyard Wire... I have traps and all that, but because i made that wire myself, i'm afraid it'll snap during a trip over thanksgiving. part number: (just the wire) 20240001 |
|
| Author: | surfsailor [ Fri Oct 23, 2009 1:51 pm ] |
| Post subject: | Re: 1980 H-16 Hulls (white) and Parts |
The part number is a jib halyard block, not the wire itself. However I cant sell you the just the block or the wire without having to cut the wire off. Can only sell the entire assy. which would be more expensive than ordering a single part from Hobie. Good luck |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|