| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Need a quick measurement of comptip halyard if possible. http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=22970 |
Page 1 of 1 |
| Author: | ChrisD [ Mon Apr 05, 2010 5:42 pm ] |
| Post subject: | Need a quick measurement of comptip halyard if possible. |
Wonder if someone would measure the length (on a comptip mast main halyard) from the shackle pin to the shoulder that sits in the V of the halyard hook at the upper end of the rope part of the rope and wire halyard. Need to splice a new one up, lost the old one. Neighboring boats have all aluminum sticks. Thanks |
|
| Author: | richandpat [ Mon Apr 05, 2010 6:17 pm ] |
| Post subject: | Re: Need a quick measurement of comptip halyard if possible. |
Line Lengths for the Hobie 16 Location Line Size/Type Length Quantity Aft Tramp Lacing Line 1/4' Halyard 15' 2 ea. Center Tramp Lacing Line 1/4' Halyard 19' 1 ea. Downhaul Line (stock downhaul) 3/16' Halyard 5' 1 ea. Mainsheet Line 3/8' Spun Braid 44' 1 ea. Jibsheet Line 5/16' Spun Braid 32' 1 ea. Outhaul Line (stock outhaul) 3/16' Halyard 7'6' 1 ea. Main Halyard Line - Comptip 1/4' Halyard 51' 1 ea. Main Halyard Line - Non-Comptip 3/16' Halyard 27' 1 ea. Jib Halyard Line (old wire halyard) Jib Halyard Line (Aussie system) 3/16' Halyard 5/32'-1/4' no stretch line 20' 70' 1 ea. 1 ea. Trapeze Adjustment Line 1/4' Yacht 3'6' 4 ea. Trapeze Shock Cord 1/4' Shock Cord with 2 Loops 7' 2 ea. Main Batten Tie Down 1/12' Leach Line 1'5' 1 per batten Jib Batten Tie Down 3/64' Leach Line (round) 1' 1 per batten Hawaian System Shock Cord 3/8' Shock Cord with 2 Loops 6'6' 1 ea This is from Hobie 16 Line Lengths and Wire Guide. I hope this helps. Rich |
|
| Author: | ChrisD [ Mon Apr 05, 2010 7:14 pm ] |
| Post subject: | Re: Need a quick measurement of comptip halyard if possible. |
Thanks Rich but I'm looking for length from headboard shackle to shoulder ( of the metal cap) where rope part of halyard converts to wire. Its about a foot give or take,,its the give or take I don't want to guess at. Hope this makes my question clearer. Thanks. |
|
| Author: | MBounds [ Tue Apr 06, 2010 7:09 am ] |
| Post subject: | Re: Need a quick measurement of comptip halyard if possible. |
13.5 inches - center of pin to shoulder of stop. |
|
| Author: | ChrisD [ Wed Apr 07, 2010 4:25 am ] |
| Post subject: | Re: Need a quick measurement of comptip halyard if possible. |
Thank you much! Chris |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|