I did a quick forum search... gotta know the lingo "reeve". There are a few threads on this one.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| rigging diagram for main, old style blocks http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=23977 |
Page 1 of 1 |
| Author: | sailinghagens [ Thu Apr 29, 2010 2:24 pm ] |
| Post subject: | rigging diagram for main, old style blocks |
I have a 78 Tequila Sunrise that I rescued last summer as my first Hobie, and can't quite remember how to put the main sheet lines back in through the blocks. The diagram in the on-line manual is for the style that's been in use for some time since. Any old diagrams out there to help me? Thanks, Don Rookie |
|
| Author: | mmiller [ Thu Apr 29, 2010 2:55 pm ] |
| Post subject: | Re: rigging diagram for main, old style blocks |
I did a quick forum search... gotta know the lingo "reeve". There are a few threads on this one.
|
|
| Author: | hrtsailor [ Thu Apr 29, 2010 4:01 pm ] |
| Post subject: | Re: rigging diagram for main, old style blocks |
Remember that the block with the becket goes on the rear bale. That is, the block that you tie the line to, should be on the rear bale. |
|
| Author: | JRagg [ Thu Apr 29, 2010 4:51 pm ] |
| Post subject: | Re: rigging diagram for main, old style blocks |
The first picture is the better way to go. You can sheet tighter before things start binding up. |
|
| Author: | sunvista [ Fri Apr 30, 2010 5:55 am ] |
| Post subject: | Re: rigging diagram for main, old style blocks |
Here is a diagram I got somewhere. Probably here at this forum. http://picasaweb.google.com/100474473357230810875/Hobie?feat=directlink |
|
| Author: | Nevek [ Fri Apr 30, 2010 8:23 am ] |
| Post subject: | Re: rigging diagram for main, old style blocks |
Since I have the newer style boom with one bale I just attach both pulleys to that and it works fine |
|
| Author: | KyleBayley [ Sun May 02, 2010 8:27 pm ] |
| Post subject: | Re: rigging diagram for main, old style blocks |
omg! i have been looking for the correct way for ever. i also have a 78 and i was just going off the diagram in the back of the repair manuel. |
|
| Author: | sailinghagens [ Wed May 12, 2010 1:45 pm ] |
| Post subject: | Re: rigging diagram for main, old style blocks |
Thanks everyone! Exactly what I was hoping for. As it turns out, I guessed on the rigging and it matches the first picture, except for the final tie. Now I just need some decent weather to get out there! |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|