http://www.harken.com/OneDesign/hobie16.php
Definitely a cool diagram and parts information for the Harken Blocks for an H16.
It gave me a better understanding of ways to upgrade my boat!
Scott
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Sorry if repost... Just found this page for Hobie 16 http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=28878 |
Page 1 of 1 |
| Author: | ECU_Sailor [ Wed Aug 04, 2010 10:19 am ] |
| Post subject: | Sorry if repost... Just found this page for Hobie 16 |
http://www.harken.com/OneDesign/hobie16.php Definitely a cool diagram and parts information for the Harken Blocks for an H16. It gave me a better understanding of ways to upgrade my boat! Scott |
|
| Author: | MBounds [ Wed Aug 04, 2010 11:54 am ] |
| Post subject: | Re: Sorry if repost... Just found this page for Hobie 16 |
Except that most of the blocks are wrong. Most of them are too big and/or overkill. Harken is in the business to sell equipment, not rigging Hobie 16s properly. |
|
| Author: | J_Eaton [ Wed Aug 04, 2010 7:24 pm ] |
| Post subject: | Re: Sorry if repost... Just found this page for Hobie 16 |
those 40mm carbos for the Aussie halyard especially! 5/32" pin diameter? that WILL bend |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|