Hobie Forums
http://www.hobie.com/au/en/forums/

Replace Trapeze handle
http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=29807		 Page 1 of 1
Author:  fredzerbe [ Tue Aug 17, 2010 4:45 pm ]
Post subject:  Replace Trapeze handle
My son recently broke one of the plastic trapeze handles on my Hobie 16. Since I bought replacements I have learned that there are better ones than the one I ordered but thought I'll go ahead and use this one since I have it. My question is how do you get the thing on the trap wire without dissasembling one of the ends to slide it over? If you do then is there a preferred way to do it?

Thanks,

Fred
Author:  sunvista [ Wed Aug 18, 2010 11:50 am ]
Post subject:  Re: Replace Trapeze handle
If you bought the original equipment plastic handle they aren't really made for replacement as much as for making a new set of trap wires with a swaging tool. There is a replacement metal handle sold that comes in two parts that screw together. I don't think there is any way to get an old crimp lug off of a cable.
Author:  hrtsailor [ Wed Aug 18, 2010 6:24 pm ]
Post subject:  Re: Replace Trapeze handle
Last year I bought one of the two piece handles and it works fine and is easy to install.
Author:  hobieokc [ Thu Aug 19, 2010 8:36 am ]
Post subject:  Re: Replace Trapeze handle
If your standing rigging is in GOOD shape and you have access or know someone with access to a swager, then you can cut the old swaging off close and reswage with the new handles. WARNING: Makes the reach distance a little longer and may not be practical for shorter folks.
If you can, these come highly recommended.
Image
Author:  fredzerbe [ Fri Aug 20, 2010 2:03 pm ]
Post subject:  Re: Replace Trapeze handle
Thanks all. Think my time will be better served by just ordering the two piece handles. Man, this is a great forum!!!

fred
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/