| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Batten Length http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=30806 |
Page 1 of 1 |
| Author: | fjgerber [ Mon Aug 30, 2010 12:44 pm ] |
| Post subject: | Batten Length |
I have recently purchased a replacement set of battens for my 70's H16. They are longer then my previous set. How far beyond the edge of the sail should the tip of the batten protrude? |
|
| Author: | MBounds [ Mon Aug 30, 2010 1:43 pm ] |
| Post subject: | Re: Batten Length |
THey should only protrude about 3 cm (including the end cap). Just cut them off with a hacksaw. |
|
| Author: | janek.w [ Fri Sep 03, 2010 3:41 pm ] |
| Post subject: | Re: Batten Length |
batten length is espacially important on the jib. if too much sticks out the halyard and get clipped on the battens and eventually rip the caps off! it has happened to me! |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|