| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Tiller Arm adjustment http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=32760 |
Page 1 of 1 |
| Author: | mmadge [ Tue Oct 19, 2010 9:29 am ] |
| Post subject: | Tiller Arm adjustment |
Does the adjustment end on the tiller arm on the newer 16's go on the port or starboard side? |
|
| Author: | mmiller [ Tue Oct 19, 2010 9:36 am ] |
| Post subject: | Re: Tiller Arm adjustment |
Simply position the tiller hinge angled forward. That determines the end for end orientation more than anything. The part should be correct when the adjuster is on the port side. The fixed end is supposed to have a green dot to indicate the starboard end when new. |
|
| Author: | mmadge [ Tue Oct 19, 2010 9:59 am ] |
| Post subject: | Re: Tiller Arm adjustment |
Thanks Matt,and yes originally it did have the green dot but it at some time came off. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|