| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Rudder nut http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=32841 |
Page 1 of 1 |
| Author: | homieg9999 [ Sun Oct 24, 2010 5:27 pm ] |
| Post subject: | Rudder nut |
I just wanted to make sure before I bought this: http://www.sailsportmarine.com/index.ph ... 5acbe2c83b Is that the nut that attaches to the bolt that connects the rudder and tiller (the one all the way on the bottom)? Thanks, Lou |
|
| Author: | ET Hobie guy [ Sun Oct 24, 2010 6:47 pm ] |
| Post subject: | Re: Rudder nut |
Should be the correct one. May get an extra or two while you're at it. You never know. |
|
| Author: | MBounds [ Mon Oct 25, 2010 6:57 am ] |
| Post subject: | Re: Rudder nut |
homieg9999 wrote: I just wanted to make sure before I bought this: http://www.sailsportmarine.com/index.ph ... 5acbe2c83b Is that the nut that attaches to the bolt that connects the rudder and tiller (the one all the way on the bottom)? Thanks, Lou The "nut" on that page is for the bolt directly above it. They're the bolts that hold the rudders in the castings, not for the tiller connector. BTW, you can get these nuts at any decent hardware store - even Home D. or Lowes. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|