yeah seems so - however at $120 per wheel when there are 4 on the axle, I would be better off scrapping it and looking for used cat-trax
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| CaTeez Beach wheels http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=33865 |
Page 1 of 1 |
| Author: | drummer63 [ Fri Feb 04, 2011 1:21 pm ] |
| Post subject: | CaTeez Beach wheels |
Does anyone know of these dolly's? I need some replacement wheels and I think the actual design is defunct Thanks |
|
| Author: | mmiller [ Fri Feb 04, 2011 3:02 pm ] |
| Post subject: | Re: CaTeez Beach wheels |
These guys? http://www.wheeleez.com |
|
| Author: | drummer63 [ Fri Feb 04, 2011 3:36 pm ] |
| Post subject: | Re: CaTeez Beach wheels |
yeah seems so - however at $120 per wheel when there are 4 on the axle, I would be better off scrapping it and looking for used cat-trax
|
|
| Author: | MVD [ Sat Feb 05, 2011 2:26 pm ] |
| Post subject: | Re: CaTeez Beach wheels |
My 20 came with a Cat-Eez dolly. I thought it was a little flimsy. I upgraded to a set of Cat Trax that I purchased through Mariner Sails and have been very satisfied with them. |
|
| Author: | DaveW70 [ Sun Feb 06, 2011 8:07 am ] |
| Post subject: | Re: CaTeez Beach wheels |
+1 on the Cat Trax. Not cheap but worth every cent I paid. |
|
| Author: | dwight916 [ Wed Feb 09, 2011 4:29 pm ] |
| Post subject: | Re: CaTeez Beach wheels |
I have two sets of the original Cateez beach wheels that were originally the 4 Orange Rolleez wheels and one set of the upgraded Cateez set that uses the 49cm Grey PU Beach Wheels and Aluminum square tubes. (Wheeleez wheels replaced the old Rolleez wheels) One set (with all my spare orange Rolleez wheels) I bought off of Rafi and is currently being used at Calling Lake for the old 16 and my buddies 18. I still use my first set of Cateez wheels for my 20 and also sometimes for Jordan's 16 and these have the grey 42cm PU beach wheels. This is still my favorite set and I am working on making them reconfigurable to go down the narrow ramp so I can launch off of Richmond Yacht club docks. The square aluminum set I have used to launch off of Santa Cruz, Mostly for my 18 - this set has 2 49cm PU Beach wheels. This is very light and easy to store/ assemble / carry. And for Christmas, I built a new set using two new 49cm PU Wheeleez Beach wheels mostly for Jordan's 16 that will auto adjust to the 20. I also designed the axles set up so the aluminum axles are spare for my 4 wheel set. The finished weight of this new set is approx. 26 lbs. All my sets can be used for all the boats without reconfiguration. Helps when loading / unloading from a mulitstack trailer. - Dwight |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|