There's 7 people on the boat in your picture. I think you might need a motor
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| looking for used H16 main sail and ib http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=34897 |
Page 1 of 1 |
| Author: | haya900r [ Sun Apr 10, 2011 6:36 am ] |
| Post subject: | looking for used H16 main sail and ib |
I got my main sail and jib both spoiled by the mice, that jib maybe trash now ,but the main sail seems could be repaired by patchs. the pictures are in my albumn,down here is the link http://photo.xuite.net/haya900r/4807860 Could any one kind to give me advice,that I should try to repair or just start to look for used H16 sail? Is it possible to cut dacron fabric from a tent for sail patches? Someone told me ,the dacron sail fabric is not same as the tent,even they are the same thickness. Thanks for advices. |
|
| Author: | TexKat [ Sun Apr 10, 2011 12:01 pm ] |
| Post subject: | Re: looking for used H16 main sail and ib |
OMG! Time for new sails. Get out the mouse traps too. |
|
| Author: | reelknotty [ Mon Apr 11, 2011 5:44 am ] |
| Post subject: | Re: looking for used H16 main sail and ib |
keep your eye on Ebay. used sails up there all the time. |
|
| Author: | bigrooster [ Thu Apr 28, 2011 7:28 pm ] |
| Post subject: | Re: looking for used H16 main sail and ib |
ebay Ijust saw two main and jibs for under three bills A set . or new main white only for under five hundred on ebay. |
|
| Author: | splashTX [ Fri Apr 29, 2011 11:37 am ] |
| Post subject: | Re: looking for used H16 main sail and ib |
There's 7 people on the boat in your picture. I think you might need a motor
|
|
| Author: | Chet3 [ Fri Apr 29, 2011 12:27 pm ] |
| Post subject: | Re: looking for used H16 main sail and ib |
Those were very hungry mice  The pictures were not what I was expecting to see.I am not sure that repairing those sails would be the best approach. If you are not concerned with appearance of the possiblility of a tear in heavy air, it might get you going again though. The fact that you were using them as is with all the holes might answer the above questions. That is a heavily loaded boat
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|